Home /  Products /  Harrier Series /  SW15
Harrier SW15 — White
Harrier Series
SW15
Compact 15″ Bass Reflex Subwoofer

Built around a 15″ high-output transducer with long linear excursion and advanced heat dissipation, the SW15 delivers deep, controlled low-frequency performance with authority and precision — in a compact enclosure suited to hospitality, portable, and fixed installation applications.

97dB
Sensitivity
133dB
Max SPL
2000W
Program
35Hz
Low Freq
Colorway
Spec Sheet — Page 1

Overview

The SW15 is a high-output passive reflex subwoofer engineered to deliver deep, controlled low-frequency performance with authority and precision. Built around a 15″ transducer with high power handling, long linear excursion, and advanced heat dissipation, it maintains impressive stability and low distortion even at sustained high output levels.

Careful acoustic design and FEA-optimised internal bracing minimise unwanted cabinet resonance, allowing the SW15 to deliver bass that remains tight, impactful, and musical across a wide range of applications. Despite its output capability, the enclosure maintains a compact footprint suited equally to portable systems, hospitality environments, and fixed installations.

For flexible deployment, the SW15 includes M10 rigging points, an integrated M20 threaded pole mount, and two parallel Neutrik® NL4 SpeakOn™ connectors within a recessed connector panel. Integrated stacking recesses allow multiple SW15 enclosures to be securely combined for increased low-frequency output.

15″ High-Output Transducer
Long linear excursion and advanced heat dissipation maintain low distortion and impressive stability at sustained high output levels.
Bass Reflex Enclosure Design
FEA-optimised internal bracing minimises cabinet resonance, producing bass that is tight, impactful, and musical across a wide range of applications.
Flexible Deployment
M10 rigging points, an integrated M20 pole mount, and integrated stacking recesses support a wide range of portable, permanent, and stacked configurations.
DSP-Optimised Crossover
Manufacturer-supplied DSP preset via the Traction Engine 4|2700-DSP ensures optimal integration with Traction full-range systems for seamless low-frequency extension.
Spec Sheet — Page 2

Specifications

S  P  E  C  I  F  I  C  A  T  I  O  N  S
TypeSingle 15″ bass reflex subwoofer
Frequency Response35Hz – 200Hz (−3dB)
HF DriverN/A
LF Driver15″ transducer with high power handling and low power compression
Power Handling LF 22000W Program
Recommended AmplifierTraction Engine 4|2700-DSP
Sensitivity 297dB
Maximum SPL 4133dB Peak
Nominal Impedance8 Ohms
CrossoverManufacturer supplied DSP preset only
Connectors2× Neutrik® NL4 SpeakOn™ with pins linked (input on 2+/−)
Nominal Dispersion (−6dB)Omni
Primary Construction15mm Birch Plywood
Available FinishBlack PU Coating  |  White PU Coating
Dimensions (W × H × D)612mm × 456mm × 515mm
Fittings8× M10 threaded rigging points  |  Integrated M20 pole mount
Weight40kg

1  Measured on axis in half (2π) space at two metres and referred to 1 metre.

2  Tested to AES 2-1984 Rev. 2003.

3  Measured in half (2π) space at 2 metres with 2.83V input, using band-limited pink noise, then referred to 1 metre.

4  Calculated at 1 metre.

Spec Sheet — Page 3

Dimensions

Harrier SW15 Dimensional Drawing
Width
612mm
Height
456mm
Depth
515mm
Weight
40kg
Notes
  1. All dimensions in millimetres unless stated otherwise.
  2. Width measured across the front baffle face.
  3. Depth measured from front baffle to rear panel, excluding connectors.
  4. Weight applies to both Black and White PU finishes. Accessories not included.
  5. M10 rigging points and M20 pole mount not shown for clarity.
Documentation

Downloads