Home /  Products /  Hawk Series /  CX6
Hawk CX6 — Orange
Hawk Series
CX6
Compact 6″ Coaxial Loudspeaker

Built around a coaxial driver arrangement, the CX6 delivers consistent, point-source performance from a highly compact enclosure — an ideal choice for discreet foreground, fill, and distributed audio applications.

95dB
Sensitivity
121dB
Max SPL
200W
Program
70°
Dispersion
Colorway
Spec Sheet — Page 1

Overview

The CX6 is a compact, rugged loudspeaker designed to integrate effortlessly into a wide variety of systems and installation environments. Built around a coaxial driver arrangement, it delivers consistent, point-source performance from a highly compact enclosure — an ideal choice for discreet foreground, fill, and distributed audio applications.

The low-frequency section features a weatherproofed paper cone with a durable thermoplastic surround, while high frequencies are reproduced by a compression driver with a 1″ voice coil and polymer diaphragm, delivering smooth, natural response with excellent intelligibility and controlled dispersion.

Designed for flexible deployment, the CX6 incorporates four M10 rigging points and four rear-mounted M6 threads for compatibility with a wide range of mounting solutions. Two parallel Neutrik® NL4 SpeakOn™ connectors are fitted to the rear with all pins linked. The cabinet is constructed from sustainably sourced 12mm birch plywood and finished in a durable black PU coating with a 2mm perforated steel grille.

Coaxial Point-Source Design
Single driver axis delivers phase coherence and consistent coverage — every seat in the room hears the same balanced sound.
Weatherproofed LF Transducer
6″ weatherproofed paper cone with thermoplastic surround. Built for demanding permanent installation environments.
Versatile Rigging System
4× M10 rigging points plus 4× rear M6 threads accommodate a wide range of brackets. U-bracket available as an accessory.
Sustainably Sourced Construction
12mm birch plywood cabinet, durable black PU coating, 2mm perforated steel grille. Neutrik® NL4 SpeakOn™ connectors throughout.
Spec Sheet — Page 2

Specifications

S  P  E  C  I  F  I  C  A  T  I  O  N  S
TypeCompact 6″ coaxial loudspeaker
Frequency Response 180Hz – 18kHz
HF Driver1″ compression driver with a conical horn
LF Driver6″ transducer with weatherproofed cone
Power Handling HF 2N/A
Power Handling 2200W Program
Recommended AmplifierTraction Engine 4|1000-DSP
Sensitivity 295dB
Maximum SPL 4121dB Peak
Nominal Impedance8 Ohms
CrossoverInternal passive network
Connectors2× Neutrik® NL4 SpeakOn™ with pins linked (input on 1+/−)
Nominal Dispersion (−6dB)70° conical
Primary Construction12mm Birch Plywood
Available FinishBlack PU coating
Dimensions (H × D × W)284mm × 106mm × 214mm
Fittings4× M10 threads  |  4× M6 threads
Weight7.25 kg
Available AccessoriesCX6 U-bracket  |  CX6 Dual Carry Bag

1  Measured on axis in half (2π) space at two metres and referred to 1 metre. With DSP preset applied.

2  Tested to AES 2-1984 Rev. 2003.

3  Measured in half (2π) space at 2 metres with 2.83V input, using band-limited pink noise, then referred to 1 metre.

4  Calculated at 1 metre.

Spec Sheet — Page 3

Dimensions

CX6 Dimensional Drawing
Height
284mm
Depth
106mm
Width
214mm
Weight
7.25kg
Notes
  1. All dimensions in millimetres unless stated otherwise.
  2. Height measured excluding any protruding connectors or fittings.
  3. Depth measured from front grille face to rear panel.
  4. Weight is for standard black PU finish. Accessories not included.
  5. M10 rigging points and M6 rear threads not shown for clarity.